Kia Rio: Roll Over Valve (ROV): Repair procedures
Removal
| 1. |
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
|
| 2. |
Remove the roll over valve (A) after releasing hooks (B).
|
Installation
| 1. |
Install in the reverse order of removal.
|
Installation
1.
Install in the reverse order of removal.
...
Fuel Filler Cap
Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which seals the fuel filler. After the gasket
on the fuel filler cap an ...
See also:
Rear Bumper Components
[5 Door]
1. Rear bumper cover
2. Rear bumper side bracket [RH]
3. Rear bumper side bracket [LH]
4. Rear bumper side under cover
[4 Door]
...
35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Special Service Tools
Tool (Number and Name)
Illustration
Use
09568-34000
Crossmember support
Supporting of the crossmember
09568-34000
Ball joint ...
Copyright © www.kirmanual.com 2014-2024