Kia Rio: Room Lamp Removal
| Room Lamp |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove room lamp lens (B).
|
| 3. |
Remove the room lamp assembly (A) after loosening th mounting
screws.
|
| 4. |
Disconnect the connector (A).
|
| 5. |
If it is necessay, replace the room lamp bulb (A).
|
Vanity Lamp
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the vanity lamp assembly (A) after disconnecting the connector
(B).
|
Luggage Lamp
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the luggage lamp assembly (A) after disconnecting the connector
(B).
[4 Door]
[5 Door]
|
Room Lamp Inspection
Room Lamp
Remove the room lamp assembly then check for continuity between terminal.
If the continuity is not as specified, replace the room lamp assemlby.
...
Room Lamp Installation
Room Lamp
1.
Install the room lamp assembly after connecting the room lamp
connector.
2.
Install the room lamp lens.
...
See also:
Roof Trim
Components
[General Type]
1 . Roof trim
2 . Sunvisor
3 . Retainer
4 . Assist handle bracket assembly
[Sunroof Type]
1 . Roof t ...
Steering Column and Shaft Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...
Installation
1.
Connect the horn connector, then reassemble the horn.
...
Copyright © www.kirmanual.com 2014-2024