Be sure to install the harness wires so they will not pinch or
interfere with other parts.
|
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
3. |
Install the seat belt buckle switch.
|
4. |
Install the front seat assembly.
(Refer to the Body group - "Front seat")
|
5. |
Reconnect the battery negative cable.
|
6. |
After installing the seat belt buckle switch, confirm proper system
operation:
|
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-25100
Disc & hub assembly bolt remover
Removal and installation of disc & hub assembly ...
Components
1. Union bolt
2. Gasket
3. Tube joint
4. Clutch tube
5. Valve plate
6. Valve spring
7. Bleeder screw
8. Release cylinder
9. Return spring
10. Piston
11 ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...