1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front seat assembly.
(Refer to the Body group - "Front seat")
|
3. |
Loosen the seat belt buckle mounting bolt and remove the seat
belt buckle switch.
|
Electric power steering
Power steering uses a motor to assist you in steering the vehicle. If the engine
is off or if the power steering system becomes inoperative, the vehicle may still
be steered, but it will require i ...
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
Brake Switch Installation
1.
Install is reverse of removal.
...