Kia Rio: Seat Heater Inspection

Driver seat and Passenger seat

1.

Check for continuity and measure the resistance between terminals.

[Cushion]

Pin No.	Description	Pin No.	Description
1	Heater(-)	4	NTC -
2	Heater(+)	5	NTC +

Average Max. temperature

- Cushion : HIGH : 42 ± 2°C / LOW : 39 ± 2°C

- Back : HIGH : 52 ± 2°C / LOW : 46 ± 2°C

2.

Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

Standard value (Fabric / Leather)

- Cushion : 1.18Ω ± 10%

- Back : 1.13Ω ± 10%

- Set : 2.31Ω ± 10%

Seat Heater Components

...

Seat Heater Switch Schematic Diagram

...

See also:

Compressor Description
The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of engine. The compressor changes the low pressure and low temperature r ...

Compressor Removal
1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. ...

Specification
Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.275 ~ 0.475 W.O.T 3.8 ~ 4.4 1.75 ~ 2.35 ...

Categories

Copyright © www.kirmanual.com 2014-2024