1. |
Disconnect the battery (-) terminal.
|
2. |
Remove the console assembly.
(Refer to the BD group - "Console")
|
3. |
Remove the seat heater switch (A) and disconnect the connector.
|
Circuit Diagram
(M/T)
(A/T)
...
Auto Light Sensor Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced,
TCM learning should be performed.
In the following case, TCM learning is require ...