1. |
In neutral position, disjoin select cable (A) from shift lever
assembly pin (B).
|
2. |
Disconnect select adjuster (A) to an arrow.
|
3. |
Shift to the 3th gear position.
|
4. |
Adjustment adjuster (B) on select cable (A) as rolling from side
to side.
|
5. |
Insert on free load and press the adjuster.
|
6. |
After shifting 2nd gear, cheking the left select gap about 1mm(if
not, loop no, 1~5)
|
7. |
In neutral position, jion by clip (A).
|
Circuit Diagram
(M/T)
(A/T)
...
Installation
•
Install the component with the specified torques.
•
...
Inspection
Front Door Lock Actuator and Switch
1.
Remove the front door trim.
(Refer to the Body group - Front door)
2.
Remove the front door l ...