Shift Lever Assembly Replacement |
1. |
Remove the floor Interior console assembly.
(Refer to "Interior (Console)" in BD group)
|
2. |
Remove the heater duct (A).
|
3. |
Remove the select cable assembly after removing select cable snap
pin (A) and clip (B).
|
4. |
Remove the shift lever assembly (B) by removing the bolts (A-4ea).
|
5. |
Remove the shift lever assembly (B) by removing the clip (A).
|
Select / Shift Cable Replacement |
1. |
Remove the floor Interior console assembly.
(Refer to "Interior (Console)" in BD group)
|
2. |
Remove the heater duct (A).
|
3. |
Remove the select cable assembly after removing select cable snap
pin (A) and clip (B).
|
4. |
Remove the shift lever assembly (B) by removing the bolts (A-4ea).
|
5. |
Remove the clip (A) from the shift cable assembly.
|
6. |
Remove the crash pad.
(Refer to "Interior (Crash pad)" in BD group.)
|
7. |
Remove the heater unit.
(Refer to "Heater (Heater unit)" in HA group.)
|
8. |
Remove the retainer (A) and nuts (B-2ea).
|
9. |
Remove the pins (A).
|
10. |
Remove the cable (B) from the cable bracket at manual transaxle
assembly side.
|
11. |
Remove the shift cable and select cable at cabin room.
|
12. |
Installation is the reverse of removal.
|
1. |
Installation the select and shift cable assembly (B) after removing
the pin (A).
|
2. |
Installation is the shift cable (A).
|
3. |
Installation is the shift lever assembly (A).
|
4. |
Shift to the 3th gear position.
|
5. |
Insert the selected cable (A) to the shift lever assembly pin
(B).
|
6. |
You have to push in the adjuster (C).
|
7. |
Remove the neutral position pin (D).
|
8. |
Install the snap pin (E).
|
Installation
Installation is in the reverse order of removal.
Perform the following :
•
Adjust a shift cable.
•
Refill engine with engine oil.
...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect igni ...
Disassembly
1.
Remove the rear cover (A) after removing nuts.
2.
Remove the mounting bolts (A) and the brush holder assembly (B).
...