Be sure to install the harness wires so they will not pinch or
interfere with other parts.
|
|
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the new seat back assembly.
(Refer to the Body group - "Seat")
|
4. |
Install the front seat assembly.
(Refer to the Body group - "Seat")
|
5. |
Recline and slide the front seat forward fully, make sure the
harness wires are not pinched of interfere with other parts.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the side airbag (SAB), confirm proper system
operation:
|
Installation
1.
Install in the reverse order of removal.
•
...
BCM connectors
Pin No.
Connector A
Connector B
Connector C
1
Battery (+)
K_LINE
Turn signal switch (RH)
2
Ignition 2
Centr ...
Front Stabilizer Bar Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...