Kia Rio: Side Airbag (SAB) Module Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace the seat back assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat back assembly.
(Refer to the Body group - "Seat")
|
Side Airbag (SAB) Module Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
...
See also:
Installation
When replacing the ECM, the vehicle equipped with immobilizer
must be performed the procedure as below.
...
Trunk Trim Replacement
•
Put on gloves to protect your hands.
•
U ...
LCD display warning (if equipped)
For vehicle’s equipped with smart key system
Key is not in vehicle
If the smart key is not in the vehicle and if any door is opened or closed with
the engine start/stop button in the ACC, ON, or ...
Copyright © www.kirmanual.com 2014-2024