Kia Rio: Signal Waveform

Specification

Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 101.3 (1.03, 14.7) 4 ...

Circuit Diagram

(M/T) (A/T) ...

See also:

Installation
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...

Hood switch Description
The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety re ...

Sunroof Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - " Roof trim") ...