Kia Rio: Special Service Tools
| Tool (Number and name) |
Illustration |
Use |
| Crankshaft front oil seal installer (09455-21200) |
|
Installation of the front oil seal |
| Valve stem oil seal installer (09222-2B100) |
|
Installation of the valve stem oil seal |
| Valve spring compressor and holder A : (09222-3K000) B : (09222-3K100) |
|
Removal and installation of the intake or exhaust valve |
| Crankshaft rear oil seal installer A : (09231-H1100) B : (09231-2B200) |
|
Installation of the crankshaft rear oil seal |
| Ring gear stoppper (09231-2B100) |
|
Installation of crankshaft pulley bolt |
| Engine coolant temperature sensor socket wrench (09221-25100) |
|
Removal and installation of engine coolant sensor |
| Oil pan remover (09215-3C000) |
|
Removal of oil pan |
| Torque angle adapter (09221-4A000) |
|
Installation of bolts & nuts needing an angular method |
Troubleshooting
Symptom
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Loose or improperly installed engine flywheel.
Repair or replace ...
See also:
Release Residual Pressure in Fuel Line
Whenever the high pressure fuel pump, fuel pipe, delivery pipe,
or injector is removed immediately after shutting off th ...
Function
Keyless Entry Function
DOOR LOCK / UNLOCK are performed with remote controller.
1.
Keyless entry function is performed in a state that key in switch
is eliminated f ...
Alternator: Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
Copyright © www.kirmanual.com 2014-2024