Kia Rio: Special Service Tools
| Tool (Number and Name) |
Illustration |
Use |
| 09200-38001,3N000 (Beam) 09200-1P100, 4X000 (Adapter) 09200-2S200 (Supporter) Engine support assembly |
|
Removal and installation of the transaxle. Use assembling 09200-1P100, 4X000 (Adapter) and 09200-2S200 (Supporter) on 09200-38001, 3N000(Beam). |
| 09200-3N000 Engine support fixture (Beam) |
|
Removal and installation of the transaxle. Use this adapter (SST No. : 09200-1P100, 4X000) with the supporter (SST No. : 09200-2S200). ※Permit operating with 09200-38001. |
| 09200-1P100 Engine support fixture (Adapter) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/09200-3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-4X000) |
| 09200-4X000 Engine support fixture (Adapter) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-1P100) |
| 09200-2S200 Engine support fixture (Supporter) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/09200-3N000) with the adapter (SST No. : 09200-1P100, 4X000) |
※ Engine support fixture special tool assembly drawing
| 1. 09200-3N000(Main bar) 2. 09200-3N000(Sub bar) 3. 09200-3N000(Handle) 4. 09200-3N000(Stopper) 5. 09200-3N000(Bolt-1) 6. 09200-4X000 (Adapter) 7. 09200-1P100(Supporter) 8. 09200-2S200(Supporter) 9. 09200-3N000(Nut) |
10. 09200-3N000(Snap ring) 11. 09200-3N000(Sub fixture) 12. 09200-3N000(Stopper) 13. 09200-3N000(Nut) 14. 09200-2S100(Spacer) 15. 09200-1P100(Sub fixture) 16. 09200-1P100(Nut) 17. 09200-3N000(Pin) |
Lubricants
Items
Recommnend lubricant
Quantity
Transaxle gear oil
SAE 75W/85
1.8 ~1.9L (0.48 ~0.50 U.S.gal., 1.90 ~ 2.0 U.S. qt., 1.58 ~
1.67 lmp qt.)
...
Inspection
Manual Transaxle Oil Inspection
1.
Park the vehicle on a level ground and stop the engine.
2.
Retighten the oil filler plug (A ...
See also:
Fluid Components Location
1. Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...
Installation
1.
Installation is the reverse of removal.
•
...
Manual Transaxle Removal
1.
Remove the following items;
A.
Air cleaner assembly (A) and air duct (B) .
(Refer to "Intake and Exhaust system" ...
Copyright © www.kirmanual.com 2014-2024