Kia Rio: Specifications
| Items |
Specification |
|
| Hood |
Type |
Rear hinged, front opening type |
| Front Door |
Construction |
Front hinged, full door construction |
| Regulator system |
Wire-drum type |
|
| Locking system |
Pin-fork system |
|
| Rear Door |
Construction |
Front hinged, full door construction |
| Regulator system |
Wire-drum type |
|
| Locking system |
Pin-fork system |
|
| Trunk Lid |
Type |
Torsior bar type |
| Tail Gate |
Type |
Front hinged, gas lifter type |
| Seat Belts |
Front |
3 point type with Emergency Locking Retractor (E.L.R) |
| Rear |
3 point type with Emergency Locking Retractor (E.L.R) 2 point type |
|
Sealant
| Applied parts |
Bead width |
| Windshield Glass |
Height : 12 mm (0.4724 in.) |
| Width : 8 mm (0.3150 in.) |
Tightening Torque
Items
N.m
kgf.m
lb-ft
Front and rear doors
Door hinge to body
34.3 ~ 41.2
3.5 ~ 4.2
25.3 ~ 30.4
Door hinge to door
...
See also:
Driver Airbag (DAB) Module and Clock Spring Description
Driver Airbag (DAB) is installed in the steering wheel and electrically
connected to SRSCM via the clock spring. It protects the driver by deploying
the airbag when frontal crash occurs. The ...
Oil Pump Unit (OPU) Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the crash pad lower panel. (Refer to “Crash pad” in BD
group.)
...
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Parking ...
Copyright © www.kirmanual.com 2014-2024