|
■ On-Line type on GDS |
1. |
With the ignition "OFF", connect GDS.
|
2. |
Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
|
3. |
Select Variant coding mode.
|
4. |
Follow steps on the screen as below.
|
1) This screen is opened when you try the variant coding again
on the SRSCM that already has the variant coding performed.
2) If communication fails, the following screen will appear.
|
1) This screen is opened when you try the variant coding again
on the SRSCM that already has the variant coding performed.
|
Front Strut Assembly Components
•
Tighten with specifed torque at curb position of vehicle
•
...
Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body group - "Floor console")
2.
Ap ...
Heater Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
...