1. |
Turn ignition switch OFF.
|
2. |
Disconnect the solenoid valve connector.
|
3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
4. |
Check that the resistance is within the specification.
|
Installation
•
Install the component with the specified torques.
•
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S termi ...
Front Seat Components
1 . Headrest
2 . Headrest guide
3 . Front seat back cover
4 . Front seat back warmer
5 . Front seat back pad
6 . Front seat back silener cloth
7 . Front seat back frame as ...