Kia Rio: SS-B Solenoid Valve(ON/OFF) Installation
1. |
Installation is the reverse of removal.
|
•
|
When installing, apply the ATF oil or white vaseline to
the O-ring (A) not to be damaged.
|
•
|
The gasket of the valve body gasket (A) use new one.
|
•
|
Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
|
|
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Inhibitor Switch monitors the lever's position(PRND) and is used to control
gear setting signals.
...
See also:
Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
Air bag
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag
(4) Curtain air bag
Even in vehicles with air bags, you and your passengers must always wear the
safety belts p ...
Circuit Diagram
...