Kia Rio: SS-B Solenoid Valve(ON/OFF) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2024 Service ManualKia Rio: SS-B Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10 ~ 11

SS-B Solenoid Valve(ON/OFF) Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

SS-B Solenoid Valve(ON/OFF) Circuit Diagram
...

See also:

Oil Pump Unit (OPU) Inspection
OPU Problem Inspection Procedure 1. TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis ground using the backside of OPU harness connector ...

Positive Crankcase Ventilation (PCV) Valve: Operation Principle
...

Power Mosfet (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the power mosfet (B) after loosening the m ...

Copyright © www.kirmanual.com 2014-2024