1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the Audio.
(Refer to the BE group - "Audio")
|
3. |
Disconnect the start/stop button connector (A).
|
4. |
Remove the start/stop button (A) after removing the screws.
|
Anchor Pretensioner (APT) Description
Front seat belt anchor pretensioner operates as well as belt pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat a ...
Front Fog Lamps Installation
1.
Install the fog lamp.
2.
Reconnect the fog lamp connector.
3.
Connect the negative (-) battery terminal.
...
ESC OFF Switch Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel.
(Refer to the Body ...