Kia Rio: Starter: Cleaning
| 1. |
Do not immerse parts in cleaning solvent. Immersing the yoke assembly
and/or armature will damage the insulation. Wipe these parts with a
cloth only.
|
| 2. |
Do not immerse the drive unit in cleaning solvent. The overrun
clutch is pre-lubricated at the factory and solvent will wash lubrication
from the clutch.
|
| 3. |
The drive unit may be cleaned with a brush moistened with cleaning
solvent and wiped dry with a cloth.
|
Starter: Inspection
Starter Solenoid Inspection
1.
Disconnect the lead wire from the M-terminal of solenoid switch.
2.
Connect the battery as shown. If ...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the rear seat (Refer to "Seat" in BD gro ...
Air Outlet and Air Flow
The mode selection switch controls the direction of the air
flow through the ventilation
System
Air Flow
Symbol
Outlet
Description
...
Tail Gate Replacement
Tail Gate Assembly Replacement
•
When removing and installing the tail gate, an assistant ...
Copyright © www.kirmanual.com 2014-2024