Description |
Specification |
Operating voltage |
9 ~ 16 V |
Operating temperature |
-30 ~ 75 °C |
Current consumption |
Max.100 mA |
Steering angle velocity |
Max. ± 1500 °/sec |
Voltage(high) |
3.0 V ~ 4.1 V |
Voltage(low) |
1.3 V ~ 2.0 V |
Pulse duty |
40 ~ 60 % |
- |
Replacement of the Steering Wheel Angle Speed Sensor
|
- |
Replacement or repair of the Steering column
|
- |
Detection of DTC codes (C1260, C1261)
|
- |
Replacement of the yaw-rate and G sensor
|
- |
Replacement of HECU
|
1. |
Connect the GDS.(CAN line or OBD connector)
|
2. |
Turn ignition switch on.
|
3. |
Press calibration button of the Steering Wheel Angle Sensor.
|
4. |
HECU calibration procedure is performed.
(Calibration records, DTC codes erasure)
|
5. |
Turn ignition switch off after calibration procedure.
|
6. |
Confirm success or failure of calibration.
|
Power Window Switch Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to ...
Towing
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to ...
Towing
If the vehicle needs to be towed, call a professional towing service.
Never tow vehicle with just a rope or chain. It is very dangerous.
...