Kia Rio: Steering Gear box Components
| 1. Tie-rod end 2. Lock nut 3. Bellows clip 4. Bellows 5. Tie rod |
6. Rack bar 7. Dust packing 8. Dust cap 9. Oil seal 10. Pinion plug |
11. Pinion assembly 12. Yoke plug 13. Yoke spring 14. Support yoke assembly 15. Rack housing |
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Steering Gear box Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
See also:
Passenger Airbag (PAB) Module Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the glove box housing.
...
Removal
1.
Remove the cyliner head cover.
(Refer to Timing System)
2.
Remove the timing chain cover.
(Refer to Timing System)
...
Front Wheel Speed Sensor Components
1. Front wheel speed sensor connector
2. Front wheel speed sensor
...
Copyright © www.kirmanual.com 2014-2024