1. |
After spreading grease on the rack bar gear part (A), install
rack bar (B) in the direction of the arrow.
|
2. |
After spreading grease on the pinion gear part, install the pinion
assembly (A).
|
3. |
After spreading three bond (Loctite) on the top plug (A) thread,
install the top plug by using the spanner.
|
4. |
Install the dust packing & cap (A).
|
5. |
Install the support yoke (A).
|
6. |
Install the Yoke plug (A) and leaf spring (B).
|
7. |
After spreading three bond (Loctite) on the Yoke plug (A) thread,
install the Yoke plug.
|
8. |
Adjust Yoke with reference to the “How to adjust Yoke”.(Refer
to "Steering gear box(Adjustment)" in ST group)
|
9. |
After fixing the yoke plug, install the rock nut (A).
|
10. |
Install the tie-rod & tie-rod end assembly (A). (The left and
right same work)
|
11. |
Caulk (A) the rack bar and tie-rod assembly joints. (The left
and right same work)
|
12. |
After spreading sealant on the rack hosing and the bellow joints
(A), install the bellows (B) in the direction of the arrow.
|
Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation
[with battery sensor] :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf. ...
Windows
(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and clo ...
Inspection
1.
Check for DTCs.
•
If a DTC is ...