Kia Rio: Thermostat: Installation
| 1. |
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve upward.
|
| 2. |
Install the water inlet fitting (A).
|
| 3. |
Fill with engine coolant.
|
| 4. |
Start engine and check for leaks.
|
Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
Thermostat: Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the thermostat gasket
Check the mounting bo ...
See also:
5Door Projected Dimensions
Front side member tooling hole (Ø6.6)
Front side member tooling hole (Ø6.6)
Side cover mounting hol ...
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
Copyright © www.kirmanual.com 2014-2024