Kia Rio: TPMS Receiver Operation
|
1. |
General Function
| A. |
Auto-learn takes place only once per Ignition cycle.
|
| B. |
On successful completion, 4 road wheel sensor ID's are
latched into memory for monitoring.
|
| C. |
Until Auto-learn completes, previously learned sensors
are monitored for under inflation / leak warnings.
|
|
|
2. |
General Conditions to Learn New Sensors:
| A. |
Receiver must determine that it is confident that sensor
is not temporary:
|
| 2) |
Uses confidence reduction of previously learned
sensors.
|
|
| B. |
Typical time at driving continuously over 12.4 mph(20
kph) to learn a new sensor is up to 20 minutes.
|
|
|
3. |
General Conditions to Un-Learn a sensor that is removed:
| A. |
It takes less than 20 minutes at 12.4 ~ 18.6 mph(20 ~
30kph).
|
| B. |
Confidence reduction is dependent on time which vehicle
is driven at speed greater than or equal to 12.4 mph(20 kph).
|
|
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
See also:
SS-B Solenoid Valve(ON/OFF) Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed
at valve body.
...
Special Service Tools
Item
Illustration
Application
Fuel Pressure Gauge
(09353-24100)
Measuring the fuel line pressure
Fuel Pressure Gauge Adapte ...
Components Location
1. Torsion beam axle
2. Shock absorber
3. Coil spring assembly
4. Rear disc
...
TPMS Receiver Description
TPMS Receiver Replacement