Kia Rio: TPMS Sensor Removal - Tire Pressure Monitoring System - Suspension System - Kia Rio UB 2012-2024 Service ManualKia Rio: TPMS Sensor Removal


     
Handle the sensor with care.
1.
Remove the tire. (Refer to "Tire Removal")
2.
Remove the valve nut.



     
The valve nut should not be re-used.
3.
Discard the valve assembly.
TPMS Sensor Description
1. Mode (1) Normal Fixed Base State A. Sensor transmissions continue at the Low Line ...

TPMS Sensor Replacement
Repair tire after using the Tire Mobility Kit (TMK) When the TPMS warning lamp OFF 1. Remove the TMK repaired tire, wheel and TPMS sensor. (Refer to ...

See also:

Operation Condition for the ISG function
1. Auto stop or Auto start condition (If all of the below condition are satisfied) Items State Remark Driving conditions ISG OFF Switch ...

Inspection
Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floorboard) and the clutch pedal clevis pin play (measured at the ...

Instrument panel vents
The outlet vents can be opened or closed separately using the thumbwheel. Also, you can adjust the direction of air delivered from these vents using the vent control lever as shown. Temperature ...

Copyright © www.kirmanual.com 2014-2024