Kia Rio: TPMS Sensor Replacement
| Repair tire after using the Tire Mobility Kit (TMK) |
When the TPMS warning lamp OFF
| 1. |
Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to "Tire removal")
|
| 2. |
Remove the sealant on the wheel and TPMS sensor (A) completely.
|
| 3. |
Install the TPMS sensor to the new tire.
|
| 4. |
Check that the normal operation of TPMS system.
|
When the TPMS warning lamp ON
| 1. |
Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to "Tire removal")
|
| 2. |
Remove the sealant on the wheel and TPMS sensor (A) completely.
|
| 3. |
Install the TPMS sensor to the new tire.
|
| 4. |
Check the tire pressure using the electrical tire pressure gauge.
|
| 5. |
Check the tire pressure of TPMS sensor using the GDS
|
| 6. |
If the difference between two checked pressures in the above is
not more than 2 psi, TPMS sensor is normal. Reinstall it to new tire.
|
| 7. |
If the difference between two checked pressures in the above is
more than 2 psi, TPMS sensor is abnormal. Install new TPMS sensor to
new tire.
|
| 8. |
Check that the normal operation of TPMS system.
|
TPMS Sensor Removal
Handle the sensor with care.
1.
Remove the tire. (Refer to "Tire Removal")
...
TPMS Sensor Installation
Sensor Fit
•
Handle the sensor with care.
•
...
See also:
Washer fluid
Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary.
Plain water may be used if washer fluid is not available.
However, use washer sol ...
Circuit Diagram
(M/T)
(A/T)
...
Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body group - "Floor console")
2.
Ap ...
Copyright © www.kirmanual.com 2014-2024