• |
Monitors the vehicle's operating conditions to determine the optimal
gear setting.
|
• |
Performs a gear change if the current gear setting differs from
the identified optimal gear setting.
|
• |
Determines the need for damper clutch (D/C) activation and engages
the clutch accordingly.
|
• |
Calculates the optimal line pressure level by constantly monitoring
the torque level and adjusts the pressure accordingly.
|
• |
Diagnoses the automatic transaxle for faults and failures.
|
Inspection
Clutch Pedal Inspection
1.
Measure the clutch pedal height (from the face of the pedal pad
to the floorboard) and the clutch pedal clevis pin play (measured at
the ...
Ignition Coil: Inspection
1.
Measure the primary coil resistance between terminals (+) and
(-).
Standard value:
0.75Ω ± 15%
...
Sunroof Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the overhead console cover
(A).
...