When replacing the TCM, the vehicle equipped with immobilizer
must be performed the procedure as below.
[In the case of installing used TCM]
Then the TCM key register process is completed automatically.
[In the case of installing new TCM]– Insert the key and turn it
to the IGN ON and OFF position.
Then the TCM key register process is completed automatically.
|
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the TCM connector (A).
|
3. |
Remove the bracket installation bolts (A) and the nut (B).
|
Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body group - "Floor console")
2.
Ap ...
Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation
[with battery sensor] :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf. ...