Symptom |
Suspect area |
Engine will not start or hard to start |
Vapor hose damaged or disconnected |
Engine struggles to start |
Malfunction of the Purge Control Solenoid Valve |
Rough idle or engine stalls |
Vapor hose damaged or disconnected |
Malfunction of the PCV valve |
|
Rough idle |
Malfunction of the Evaporative Emission Control System |
Excessive oil consumption |
Positive crankcase ventilation line clogged |
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
...
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module ...
Special Service Tools
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09455-21200)
Installation of the front oil seal
Va ...