Kia Rio: Valve Body Components Location
| 1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor |
4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Under drive brake (UD/B) pressure flow hole |
Valve Body Flow
| 1. To cooler 2. From cooler 3. Lubrication(rear) 4. OD Clutch pressure 5. Reducing pressure (red2) 6. Reducing pressure (red1) 7. From damper pressure 8. To damper pressure |
9. Lubrication(front) 10. 35R clutch pressure 11. 26 brake pressure 12. From oil pump 13. To oil pump 14. UD Brake pressure 15. Low & reverse pressure |
Valve Body Description
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump. Specifically,
these valves consist of pressure regula ...
Valve Body Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
See also:
Hands free switch Installation
1.
Reassemble the hands free switch after connecting the connector.
2.
Reassemble the steering wheel.
3.
Reasse ...
Photo Sensor (FATC only) Description
The photo sensor is located at the center of defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode.
The solar radiation received by its light receiving port ...
Rear Wheel Speed Sensor Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Copyright © www.kirmanual.com 2014-2024