Kia Rio: Weight Classification System (WCS) Description

WCS is intended to detect the occupant’s physique in order to determine whether the passenger airbag should be suppressed or deployed. WCS classifies the front passenger side seat by measuring physical weight loaded onto the front passenger side seat. It is composed of 2 weight sensors of strain gauge type and an ECU which gathers information of weight sensors, calculates the measured weight and makes decisions of the classification of the passenger. It is installed on the left side (inner position in vehicle) of the seat track assembly fastened with respective mounting bolts and nuts.

Seat Belt Buckle Switch (BS) Installation

   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Weight Classification System (WCS) Components

...

See also:

Immobilizer Control Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air tem ...

Interior
1. Auto Defogging Sensor 2. Photo Sensor 3. Heater & A/C controller (MANUAL) 4. Heater & A/C controller (FATC) 5. In-car Sensor 6. Heater & Blower Unit 7. ...