Kia Rio: Windshield Wiper-Washer Switch Removal
Wiper and Washer Switch
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 3. |
Remove the steering column upper (A) and lower (B) shrouds after
removing the screw.
|
| 4. |
Disconnect the connector(A). Release the lock of wiper switch
using tool without removing the steering wheel and the clock spring.
Remove the wiper and washer switch.
|
Windshield Wiper-Washer Switch Inspection
Wiper And Washer Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
...
Windshield Wiper-Washer Switch Installation
1.
Install the wiper switch.
2.
Install the steering column upper and lower shrouds.
...
See also:
Circuit Diagram
(M/T)
(A/T)
...
Installation
•
Thoroughly clean all parts to be assembled.
•
...
Mode Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad.
(Refer to BD group - "Crash Pad")
...
Copyright © www.kirmanual.com 2014-2024