Kia Rio Manuals

Kia Rio: [CVVT System Mode] - CVVT & Camshaft - Cylinder Head Assembly - Engine Mechanical System - Kia Rio UB 2012-2026 Service ManualKia Rio: [CVVT System Mode]


(1) Low Speed / Low Load
 (2) Part Load




(3) Low Speed / High Load
 (4) High Speed / High Load





Driving
Condition
 Exhaust Valve
 Intake Valve
Valve
Timing
 Effect
 Valve
Timing
 Effect
(1) Low Speed
/Low Load
 Completely
Advance
 * Valve Under-lap
* Improvement of combustion stability
 Completely
Retard
 * Valve Under-lap
* Improvement of combustion stability
(2) Part Load
 Retard
 * Increase of expansion work
* Reduction of pumping loss
* Reduction of HC
 Retard
 * Reduction of pumping loss
(3) Low Speed
/High Load
 Retard
 * Increase of expansion work
 Advance
 * Prevention of intake back flow (Improvement of volumetric efficiency)
(4) High Speed
/High Load
 Advance
 * Reduction of pumping loss
 Retard
 * Improvement of volumetric efficiency

Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force generated by the engine oil supplied to the advance or retard chamber in accordance with the CVVT oil control valve con ...

Removal
1. Remove the cyliner head cover. (Refer to Timing System) 2. Remove the timing chain cover. (Refer to Timing System) ...

See also:

A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operatin ...

Antenna Installation
1. Install the roof antenna, then connect the cable and the connector. 2. Install the rear roof trim. ...

Inspection
1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. Valv ...

Categories

Copyright www.kirmanual.com 2014-2026