Kia Rio: Clutch & Brake

The 6-spd automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a 35R clutch (35R/C). These clutches and brakes are operated by controlling the hydraulic pressure.

Valve Body Installation

1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Clutch & Brake Components Location

1. Overdrive clutch (OD/C) 2. One way clutch (OWC) 3. Low & Reverse brake (LR/B) 4. Underdrive brake (UD/B) 5. 26 brake(26/B) 6. 35R clutch (35R/C) 7. Damper c ...

See also:

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

SRS Control Module (SRSCM) Variant coding
After replacing the SRSCM with a new unit, the “Variant Codingâ€� procedure must be performed.    1. ...

Brake Switch Removal
1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group-"crash pad") 3. ...