Kia Rio: Cruise Control Switch: Installation

Cruise Control Switch: Removal

1. Disconnect the battery (-) terminal. 2. Remove the air-bag module from the steering wheel. (Refer to Restraint - "Driver Airbag (DA ...

Cruise Control Switch: Inspection

Measuring Resistance 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between t ...

See also:

Installation
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...

Waveform
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these sig ...

Auto Light Sensor Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw ( ...