Kia Rio: Driveshaft and axle - Kia Rio UB 2012-2018 Service ManualKia Rio: Driveshaft and axle

Shift Lever Adjustment
Adjusting the control cable 1. Set room side AT lever(shift lever) and automatic transaxle side manual control lever to "N" position. ...

Specification
Engine T/M Joint type Max. permissible angle Outer Inner Outer Inner Gasoline 1.6 MT, AT BJ#82 TJ#82 ...

See also:

Inspection
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Tire Wear
   • Using tires and wheel other than the recommended sizes could cause unusual handling ch ...

Inspection
Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

Copyright © www.kirmanual.com 2014-2018