Kia Rio: Front Washer Motor Removal - Windshield Wiper/Washer - Body Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Front Washer Motor Removal


     
-
When servicing the washer pump, be careful not to damage the washer pump seal.
-
Do not operate the washer pump before filling the washer reservoir.
Failure to do so could result in premature pump failure.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front wheel guard (RH).
(Refer to the BD group - "Front wheel guard")
3.
Remove the washer hose and disconnect the washer motor connector (A).


4.
Remove the washer reservoir (A) after removing 2 bolts.


Front Washer Motor Inspection
Front Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. &nb ...

Front Washer Motor Installation
1. Install the washer reservoir.    Before installing the pump motor, check ...

See also:

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

 Brake fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

4Door Under Body
Projected Dimensions Front side member tooling hole (Ø6.6) Front side member tooling hole (Ø6.6) ...

Copyright © www.kirmanual.com 2014-2019