Kia Rio: Ignition Coil: Installation

Ignition Coil: Removal

1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

Ignition Coil: Inspection

1. Measure the primary coil resistance between terminals (+) and (-). Standard value: 0.75Ω ± 15% ...

See also:

TJ Joint Installation
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Reassembly
1. Reassemble in the reverse order of disassembly.    • ...