Kia Rio: Ignition Coil: Inspection - Ignition System - Engine Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Ignition Coil: Inspection

1.
Measure the primary coil resistance between terminals (+) and (-).



Standard value: 0.75Ω ± 15%

Ignition Coil: Installation
1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

Spark Plug: Description
A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by mean ...

See also:

Rear Wiper Motor Installation
1. Install the rubber packing. 2. Install the rear wiper motor assembly. Tightening torque : 6.86 ~ 9.81N ...

Disaseembly
1. Loosen the screw(6ea) and remove the lower cover (A) from the steering wheel body. 2. Disconnect the heated steering wheel unit ...

Troubleshooting
Symptom Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Loose or improperly installed engine flywheel. Repair or replace ...

Copyright © www.kirmanual.com 2014-2020