Kia Rio: Input Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: Input Speed Sensor Specifications

▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8)
0.0472 ~ 0.0709
Output voltage(V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data ...

Input Speed Sensor Circuit Diagram
...

See also:

4Door Front Body C
Engine mounting hole (Ø11) Transaxle mounting hole (Ø12) Engine mounting hole (Ø12) ...

Antenna Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable and the connector (A). ...

Installation
1. Install the intake CVVT (A) and exhaust CVVT (B). Tightening torque : 63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft) ...

Copyright © www.kirmanual.com 2014-2019