Kia Rio: Inspection

Horn Inspection

Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal.

1 : 12V Ground(-)

2 : 12V (+)

The horn should make a sound. If the horn fails to make a sound, replace it.

Component Location

1. Horn switch 2. Horn relay (Egine Room Relay) 3. Horn 4. Clock spring ...

Removal

1. Remove the under cover. 2. Remove the mounting nut and disconnect the horn connector, then remove the horn (A). ...

See also:

Antenna Coil Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Front Driveshaft Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) fro ...

Specification
...