Kia Rio: Instrument Cluster Installation - Indicators And Gauges - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Instrument Cluster Installation

1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the center fascia panel.
Instrument Cluster Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or romover, remove the cluster fascia panel (A). ...

Troubleshooting
Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) is blown Check for short and replace fuse Speedometer faulty ...

See also:

Inspection
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Components
1. HECU module 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. Yaw rate & G sensor 5. Steering angle sensor 6. ABS Warning lamp 7. Parking brake/EBD warn ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Copyright © www.kirmanual.com 2014-2020