Kia Rio: License Lamp Removal - Lighting System - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: License Lamp Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens by pushing the clip (A).


3.
Replace the lamp bulbs (B) after turning the socket in the counter clock-wise direction from lens (A).


Overhead Console Lamp Installation
1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. 2. Install the lens after tightening ...

License Lamp Installation
1. Install the bulb. 2. Connect the lens and license lamp. ...

See also:

Output Speed Sensor Installation
1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Console Replacement
Floor Console Replacement [M/T]    • A plastic trim tool is recommended, but if p ...

Oil Pump Components
1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10 ...

Copyright © www.kirmanual.com 2014-2020