Kia Rio: Multimedia Jack Installation - Audio - Body Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Multimedia Jack Installation

1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.

     
Make sure the multimedia connector and the console upper cover connectors are plugged in properly.
Multimedia Jack Removal
1. Using a screwdriver or remover, remove the multimidia jack assembly.    ...

Multimedia Jack Troubleshooting
Symptom Suspected area Repairment Pressing power switch does not turn on system Radio receiver power source circuit R-1 LCD module R ...

See also:

Components
1. Brake booster 2. Master cylinder assembly 3. O-ring ...

AGM Battery: Removal and Installation
1. Remove the battery. (1) Disconnect the battery terminals (A). Tightening torque (+ ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Copyright © www.kirmanual.com 2014-2019