Kia Rio: On-board Refueling Vapor Recovery (ORVR) valve

Installation

Installation is the reverse of removal. Canister installation bolt/nut: 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...

Removal

1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump�) 2. Remove the ORVR valve (A) after releasing hooks (B) ...

See also:

Transaxle Control Module (TCM) Replacement
   When replacing the TCM, the vehicle equipped with immobilizer must be performed the procedure as below. [In the ...

General Troubleshooting Information
Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and cl ...

Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...