Kia Rio: Rear Hub - Carrier Inspection - Rear Axle Assembly - Driveshaft and axle - Kia Rio UB 2012-2019 Service ManualKia Rio: Rear Hub - Carrier Inspection

1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
Check the rear axle carrier for cracks
4.
Check the bearing for cracks or damage.
Rear Hub - Carrier Replacement
[Drum Type] 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Suspension System
...

See also:

Oil Pressure Switch: Inspection
1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. ...

Circuit Diagram
(M/T) (A/T) ...

Blower Resistor (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the blower resistor (B) after loosening th ...

Copyright © www.kirmanual.com 2014-2019