Kia Rio: Room Lamp Installation - Lighting System - Body Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Room Lamp Installation

Room Lamp
1.
Install the room lamp assembly after connecting the room lamp connector.
2.
Install the room lamp lens.
3.
Connect the negative (-) battery terminal.
Vanity Lamp
1.
Install the vanit lamp assembly after connecting the vanity lamp connector.
2.
Connect the negative (-) battery terminal.
Luggage Lamp
1.
Install the luggage lamp assembly after connecting the connector.
2.
Connect the negative (-) battery terminal.
Room Lamp Removal
Room Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove room lamp lens (B). 3. Remove ...

Overhead Console Lamp Circuit Diagram
...

See also:

TPMS Sensor Replacement
Repair tire after using the Tire Mobility Kit (TMK) When the TPMS warning lamp OFF 1. Remove the TMK repaired tire, wheel and TPMS sensor. (Refer to ...

Instructions
When Handling Refrigerant 1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite. When handling the r ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...

Copyright © www.kirmanual.com 2014-2019