Kia Rio: Turn Signal Lamp (Door mirror) Removal - Lighting System - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Turn Signal Lamp (Door mirror) Removal

Door Mirror Turn Signal Lamp
1.
Using a screwdriver or remover, remove the mirror (A) from th mirror holder.
Becareful not to damage to the clip.


2.
Remove the front cover (A), after loosening 3 screws.


3.
Remove the rear cover (A).


4.
Disconnect the mirror connector.Remove the door mirror turn signal lamp (A) after loosening screw.


Head Lamps Adjustment
Head Lamp Aiming Instructions The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions. ...

Turn Signal Lamp (Door mirror) Installation
Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

See also:

TJ Joint Installation
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

General Troubleshooting Information
Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and cl ...

Instrument Cluster Inspection
Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. Use wheel chocks ...

Copyright www.kirmanual.com 2014-2026