Kia Rio: Start/Stop Button Removal - Button Engine Start System - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Start/Stop Button Removal

1.
Disconnect the negative(-) battery terminal.
2.
Remove the Audio.
(Refer to the BE group - "Audio")
3.
Disconnect the start/stop button connector (A).


4.
Remove the start/stop button (A) after removing the screws.


Start/Stop Button Component
...

Start/Stop Button Installation
1. Install the start/stop button. 2. Install the Audio. ...

See also:

Low brake fluid level warning
If the warning light remains on, it may indicate that the brake fluid level in the reservoir is low. If the warning light remains on: 1.Drive carefully to the nearest safe location and stop your v ...

Description
Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engin ...

Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TP ...

Copyright www.kirmanual.com 2014-2026